| System |
| |
Carrying Case Size |
58 x 36 x 19 cm (23 x 14 x 7.5 in) approx. |
| |
Weight |
11 kg (24 lb) approx. including typical laptop PC. |
| |
|
|
| Laptop Personal Computer |
| |
Processor |
700 MHz Pentium min, 1 GHz Pentium rec. |
| |
Memory |
64 MB min, 128 MB rec. |
| |
Free Hard Disc |
100 MB min. |
| |
Screen |
1024 x 768 pixels min. |
| |
CDROM |
24X rec. |
| |
PCMCIA Slot |
Type 2 |
| |
Operating System |
Windows 98/Me/NT/2000/XP |
| |
| Data Acquisition Card |
| |
Type |
National Instruments DAQCard-700 or DAQCard-6024E |
| |
Resolution/Range |
Bits |
Input Range |
Resolution |
| |
|
DAQCard-700 |
12 |
Fine: ±2.5V, Coarse: ±10V |
Fine: 1.2 mV, Coarse: 4.8 mV |
| |
|
DAQCard-6024E |
12 |
Fine: ±0.5V, Coarse: ±10V |
Fine: 0.24 mV, Coarse: 4.8 mV |
| |
| Core System: SC11 AC Magnetic Field Sensor |
| |
Co-ordinate System |
X, Y, Z rectangular Cartesian |
| |
Bandwidth |
1 Hz - 5 kHz |
| |
Dynamic Range |
80 mG (8 µT) Pk-Pk |
| |
Noise Limit |
7 µG RMS max. |
| |
Accuracy |
±1 % |
| |
A channel Inputs |
|
| |
|
VIBR |
1-axis vibration (Wilcoxon 731A) |
| |
|
AUX |
BNC voltage input, DC coupled, ±10 V range, 100 kΩ input impedance |
| |
Anti-aliasing filters |
5 kHz, 250 Hz (switchable) |
| |
| Vibration Sensor: Wilcoxon 731A Accelerometer |
| |
Type |
Wilcoxon Research, model 731A |
| |
Dynamic Range |
20 mm/s2 Pk-Pk |
| |
Bandwidth |
0.1 - 500 Hz |
| |
Noise Limit |
7 µm/s2 RMS max. |
| |
|
0.35 µm/s RMS at 1Hz, 0.11 µm/s RMS at 5Hz |
| |
|
0.07 µm RMS at 1Hz, 0.0035 µm RMS at 5Hz |
| |
Accuracy |
±5 % (with gain calibration file) |
| |
| Acoustic Sensor: Sound Level Meter |
| |
Type |
Radio Shack, Model 33-2050 or 33-4050 |
| |
Bandwidth |
32Hz - 20 kHz, dBA and dBC weightings |
| |
Dynamic Range |
126 dB |
| |
Noise Limit |
50 dB |
| |
Accuracy |
±2 dB at 114 dB sound level |
| |
Meter Response |
Fast, Slow |
| |
Signal Output |
1.0 V peak into open circuit with full scale meter deflection at 1 kHz |
| |
Load Impedance |
10 kΩ min. |
| |
Distortion |
< 2 % at 1 kHz and 0.5 V |
| |
| 1-Axis Magnetic Field Sensor: Flux Gate Magnetometer |
| |
Type |
MEDA µMAG-01N |
| |
Bandwidth |
0 - 100 Hz (some models 0 - 400 Hz) |
| |
Ranges |
±20.00, ±200.0, ±2000 mG full scale |
| |
Accuracy |
±0.5% of full scale |
| |
Linearity |
±0.05% of full scale |
| |
Signal Output |
±2 V full scale |
| |
| Programs (General) |
| |
Clipping |
Audio/visual indication |
| |
Pause control |
Freeze/resume instrument operation |
| |
Calibration panel |
Add/select sensors, set ranges, calibrate offsets, microphone self check, add/edit user defined units, set export file options. |
| |
Setup file |
Open/save instrument controls |
| |
Export |
Export results for spreadsheet |
| |
Comment pad |
3 lines |
| |
Print window |
Print current screen display |
| |
Help |
Context help on controls, online help file |
| |
Year 2000 |
All SC11 programs are year 2000 compliant |
| |
| Oscilloscope |
| |
Channels |
4 (X, Y, Z and A) each with style and position controls |
| |
Divisions |
10 X 10 |
| |
Amplitude Units |
| |
|
Magnetic Field |
mG, nT, mT, mA/m, A/m |
| |
|
Vibration |
mg's*, mm/s2 |
| |
|
Acoustic |
mPa, Pa |
| |
|
Voltage |
mV, V, user defined units |
| |
|
Resultant |XYZ| |
Magnetic Field units |
| |
Timebase |
0.5, 1, 2, 5, 10, 20, 50, 100, 200 ms/div |
| |
Bandwidth |
5 kHz (0.5 ms/div - 5 ms/div) |
| |
|
250 Hz (10 ms/div - 200 ms/div) |
| |
Digital Meter |
RMS, Peak to Peak (all channels) |
| |
Trigger |
Auto/Manual level, +/- edge, Auto/Manual source |
| |
|
Single Shot |
| |
| Spectrum Analyser |
| |
Channels |
DAQCard-700: |
1 (X, Y, Z or A, selectable) |
| |
|
|
DAQCard-6024E: |
4 (X, Y, Z and A) |
| |
Displays |
Waveform (autoscaling), Spectrum |
| |
Amplitude units |
|
| |
|
Magnetic field |
mG, nT, µT, mA/m, A/m |
| |
|
Vibration |
µg's*, mg's*, µm/s2, mm/s2, µm/s, mm/s, nm, µm |
| |
|
Acoustic |
mPa, Pa, dB |
| |
|
Voltage |
mV, V, user defined units |
| |
|
Resultant |XYZ| |
Magnetic Field |
| |
Amplitude ranges |
0.5, 0.7, 1, 1.5, 2.5, 3.5, 5, 7, 10, 15, 25, 35, 50, 70, 100, 150, 250, log full scale |
| |
Frequency ranges |
20, 25, 30, 40, 50, 60, 80, 100, 125, 150, 200, 250, 300, 400, 500, 600, 800, 1000, 1250, 1500, 2000 Hz full scale |
| |
Number of points |
200, 250, 400, 500, 800, 1000, 1600, 2000,3200, 4000 |
| |
Accuracy |
Amplitude: ±5% (not including sensor accuracy or noise) |
| |
|
Frequency: ±0.01% ±0.02 div |
| |
Waveform windows |
None, Hanning, Flat top |
| |
Spectrum modes |
RMS, 0-Pk, Pk-Pk, PSD, Third Octave |
| |
Combine spectra |
Average/Peak, Max no. spectra |
| |
Cursor modes |
Total RMS between 2 tracking cursors, 10 harmonic cursors |
| |
Pan & Zoom Palette |
Pan, zoom and format spectrum display |
| |
Capture indicator |
Indicates progress of data acquisition |
| |
Specification files |
Create, edit, add & remove. Compare with measurements. |
| |
Data logging |
Start: Now, At time, Triggered by flat level, Triggered by spec |
| |
|
Stop: Period, File size, Disk space |
| |
|
Min. time step: 1 minutes |
| |
| Chart Recorder |
| |
Channels |
4 (X, Y, Z and A) each with style and position controls |
| |
Divisions |
10 X 10 |
| |
Amplitude units |
|
| |
|
Magnetic field |
mG, nT, µT, mA/m, A/m |
| |
|
Vibration |
mg's*, mm/s2, µm/s, mm/s, µm |
| |
|
Acoustic |
mPa, Pa, dB |
| |
|
Voltage |
mV, V, user defined units |
| |
|
Resultant |XYZ| |
Magnetic Field |
| |
Timebase |
0.5, 1, 2.5, 5, 10, 25, 50 s/div (50 points/div) |
| |
Chart length |
200 div. max. (1.6 minutes – 2:45 hours:minutes) |
| |
Max Bandwidth |
(Bandwidth may be reduced by bandwidth controls) |
| |
|
Magnetic field (SC11 sensor) |
0.1 Hz - 5 kHz |
| |
|
Vibration |
0.1 Hz - 500 Hz |
| |
|
Acoustic (SLM) |
32 Hz - 5 kHz |
| |
|
Voltage |
DC - 5 kHz |
| |
Bandwidth controls |
XYZ/A upper/lower for all modes except narrow band |
| |
Narrow band filter |
Centre frequency, f0 range: 1 Hz - 1250 Hz
Accuracy: ±1% within pass band (f0 ± 3%)
Attenuation: 60 dB min. in stop band (f0 ± 20%) |
| |
Chart modes |
Waveform, RMS, Peak to Peak, Narrow band RMS, Narrow band Pk-Pk. |
| |
Markers |
Time, text string |
| |
Update modes |
Strip chart, scope chart, sweep chart |
| |
Chart palette |
Pan, zoom, format, reset and clear chart |
| |
Data logging |
Start: Now, At time, Triggered
Stop: Period, File size, Disk space
Min. time step: Whole number of points (0.01 s at 0.5 s/div) |
| |
| * g is the acceleration due to gravity |
|
